Hands on the bar rule.
-
- Posts: 379
- Joined: Sun Oct 30, 2016 5:43 pm
Hands on the bar rule.
Postby lone rider » Fri Dec 03, 2021 11:55 pm
Can anyone confirm whether the brifters are considered to be part of the handlebar? At club level there is definite mixed interpretations of what this rule is. My reading of it was to stop people riding with forearms on the bars and hands free of anything. Now enter the inward turned brifter position which enables people to stay narrow yet maintain hands on the top of the brifter. I have seen many pro's race like this all year and nobody has been DQ'd yet for some reason there is people that think is illegal. Is there any clarification that states exactly what the handlebars is?
- P!N20
- Posts: 4206
- Joined: Thu Jul 22, 2010 6:50 pm
- Location: Wurundjeri Country
Re: Hands on the bar rule.
Postby P!N20 » Sat Dec 04, 2021 10:24 am
I probably shouldn't be commenting as I don't race and have no familiarity with the rules, but these days most road cyclists spend the majority of their time with their hands on the hoods, so if they weren't considered part of the handlebars then everyone would be DQ'd from the get go. If you orientate your brifters so you're a bit more aero, then go for it. IMO, YMMV, etc.
- RonK
- Posts: 11508
- Joined: Mon Aug 24, 2009 2:08 pm
- Location: If you need to know, ask me
- Contact:
Re: Hands on the bar rule.
Postby RonK » Sat Dec 04, 2021 10:34 am
The puppy paws position was banned by the UCI, as was the was the bar with extended drops to rest the forearms on (the rider was dq'd).
I have not seen the specific rule, but it seems clear that the forearms may not rest on the bars. I don't believe there is currently a rule about the lever position.
Local commissaires may not be enforcing this but I expect it will be at any UCI sanctioned races.
There is some talk that the inward turned hoods will be banned. I wouldn't be surprised to see a rule change before the next road season starts.
I have not seen the specific rule, but it seems clear that the forearms may not rest on the bars. I don't believe there is currently a rule about the lever position.
Local commissaires may not be enforcing this but I expect it will be at any UCI sanctioned races.
There is some talk that the inward turned hoods will be banned. I wouldn't be surprised to see a rule change before the next road season starts.
Cycle touring blog and tour journals: whispering wheels...
- g-boaf
- Posts: 23307
- Joined: Mon Sep 26, 2011 6:11 pm
Re: Hands on the bar rule.
Postby g-boaf » Sat Dec 04, 2021 6:36 pm
I'm sure I remember a directive that this was not allowed in local races. We never allowed this in our races forearms on the bars, pseudo-TT position.
I'm so happy not to be a comm anymore. These minutiae can be argued by others.
Last edited by g-boaf on Sat Dec 04, 2021 9:35 pm, edited 1 time in total.
-
- Posts: 379
- Joined: Sun Oct 30, 2016 5:43 pm
Re: Hands on the bar rule.
Postby lone rider » Sat Dec 04, 2021 9:06 pm
100% agree. If the hoods arent part of the handlebar then the records for the past 30 years since the invention of STI levers need to be binned.P!N20 wrote: ↑Sat Dec 04, 2021 10:24 amI probably shouldn't be commenting as I don't race and have no familiarity with the rules, but these days most road cyclists spend the majority of their time with their hands on the hoods, so if they weren't considered part of the handlebars then everyone would be DQ'd from the get go. If you orientate your brifters so you're a bit more aero, then go for it. IMO, YMMV, etc.
-
- Posts: 2849
- Joined: Fri Apr 17, 2009 9:44 pm
- Location: Middle East, Melbourne
Re: Hands on the bar rule.
Postby ironhanglider » Mon Dec 06, 2021 9:44 am
The rules aren't hard to find.
General
Of course the UCI will expand the use of their bike scanning X-ray machines and make the rider's put their arms into them so they can determine where each rider's forearm stops and wrist starts. Maybe they will make a ruling on gloves so that gloves must not extend to the forearm, and therefore any ungloved contact on the bars is illegal. Note this means that bare hands is now outlawed, and the UCI can have glove measurement checks in addition to the sock measurements.
Cheers,
Cameron
General
Road racesUCI wrote:1.3.008 Position
The rider shall normally assume a sitting position on the bicycle. This position requires that the only points of support are the following: the feet on the pedals, the hands on the handlebars and the seat on the saddle.
(text modified on 01.01.09)
Note that the issue in question is not whether the brifters are part of the bar, nor how they are aligned, but whether the forearm is a point of support. There was some media interest this year when a rider used some funky handlebars which had a really short stem and had an extremely long reach, which were designed to make the horizontal forearm position more comfortable. The bars themselves were not illegal, but resting the forearms on them (as they were designed for) was.UCI wrote:2.2.025 Conduct of riders
...
Position on the bicycle
Riders must observe the standard position as defined by article 1.3.008. Sitting on the bicycle’s top tube is prohibited. Furthermore, using the forearms as a point of support on the handlebar is prohibited except in time trials.
(text modified on 1.01.15; 1.01.18; 1.01.19; 1.04.21; 17.04.21).
Of course the UCI will expand the use of their bike scanning X-ray machines and make the rider's put their arms into them so they can determine where each rider's forearm stops and wrist starts. Maybe they will make a ruling on gloves so that gloves must not extend to the forearm, and therefore any ungloved contact on the bars is illegal. Note this means that bare hands is now outlawed, and the UCI can have glove measurement checks in addition to the sock measurements.
Cheers,
Cameron
Jump to
- General Australian Cycling Topics
- Info / announcements
- Buying a bike / parts
- General Cycling Discussion
- The Bike Shed
- Cycling Health
- Cycling Safety and Advocacy
- Women's Cycling
- Bike & Gear Reviews
- Cycling Trade
- Stolen Bikes
- Bicycle FAQs
- The Market Place
- Member to Member Bike and Gear Sales
- Want to Buy, Group Buy, Swap
- My Bikes or Gear Elsewhere
- Serious Biking
- Audax / Randonneuring
- Retro biking
- Commuting
- MTB
- Recumbents
- Fixed Gear/ Single Speed
- Track
- Electric Bicycles
- Cyclocross and Gravel Grinding
- Dragsters / Lowriders / Cruisers
- Children's Bikes
- Cargo Bikes and Utility Cycling
- Road Racing
- Road Biking
- Training
- Triathlon
- International and National Tours and Events
- Cycle Touring
- Touring Australia
- Touring Overseas
- Touring Bikes and Equipment
- Australia
- Western Australia
- New South Wales
- Queensland
- South Australia
- Victoria
- ACT
- Tasmania
- Northern Territory
Who is online
Users browsing this forum: No registered users
- All times are UTC+11:00
- Top
- Delete cookies
About the Australian Cycling Forums
The Australian Cycling Forums is a welcoming community where you can ask questions and talk about the type of bikes and cycling topics you like.
Bicycles Network Australia
Forum Information
Connect with BNA
Brought to you by Bicycles Network Australia | © 1999 - 2024 | Powered by phpBB ®
This website uses affiliate links to retail platforms including ebay, amazon, proviz and ribble.
This website uses affiliate links to retail platforms including ebay, amazon, proviz and ribble.